TM 9-2320-363-34-2
Foam Adhesive Tape
Where it is necessary to remove parts, note that foam adhesive tape is used in joints. Use care in parts
removal to avoid unnecessary distortion. Parts should be separated by peeling them apart using knife or
chisel to start peeling action. Before parts are assembled, remove any remaining foam adhesive tape from
joints so parts will fit together with good, even contact.
Rivet Patterns
TRIPLE OR MULTIPLE ROW RIVETING PATTERN
1.
RIVET PATTERNS ARE DENOTED BY RIVET SPACING AND RIVET EDGE DISTANCE. RIVET
EDGE DISTANCE IS DISTANCE FROM CENTER OF RIVET TO NEAREST EDGE OF SHEET. RIVET
SPACING IS DEFINED AS DISTANCE FROM CENTER OF RIVET TO CENTER OF ADJACENT
RIVET.
22-23
