TM 9-2320-363-34-2
C A U T I O N
Use extreme care in performance of step 4 to avoid damaging grease fitting
hole.
4.
5.
6.
NOTE
Note position of cotter pin hole prior to removal to aid in installation.
USING BRASS DRIFT PIN OR PRESS, REMOVE PIN (5) FROM TOP PLATE (6). DISCARD PIN.
REMOVE AND DISCARD SECONDARY RELEASE LEVER (7) AND SPRING (8).
REMOVE GREASE FITTING (9) AND COTTER PIN (10) FROM PIN (11). DISCARD COTTER PIN.
C A U T I O N
Use extreme care in performance of step 7 to avoid damaging grease fitting
hole.
7.
8.
9.
10.
11.
12.
13.
14.
15.
USING BRASS DRIFT PIN OR PRESS, REMOVE PIN (11) FROM TOP PLATE (6). DISCARD PIN.
REMOVE JAW (12) AND SPRING (13) FROM TOP PLATE (6). DISCARD SPRING.
REMOVE LOCK NUT (14) AND JAW (15) FROM TOP PLATE (6). DISCARD LOCK NUT.
REMOVE LOCK NUT (16), SCREW (17), WASHER (18), AND BUSHING (19) FROM RELEASE
LEVER (20). DISCARD LOCK NUT AND BUSHING.
NOTE
It may be necessary to remove paint from surfaces to have sufficient clearance
for removal of primary release handle.
DISCONNECT PRIMARY RELEASE HANDLE (21) FROM RELEASE LEVER (20).
REMOVE PRIMARY RELEASE HANDLE (21) AND RELEASE LEVER (20) FROM TOP PLATE (6).
DISCARD RELEASE LEVER.
REMOVE AND DISCARD PLUNGER (22) AND SPRING (23) FROM TOP PLATE (6).
REMOVE SOCKET HEAD SCREW (24), LOCK NUT (25), SPRING (26), AND ADJUSTING WEDGE
(27). DISCARD SOCKET HEAD SCREW, LOCK NUT, AND ADJUSTING WEDGE.
REMOVE TWO GREASE FlTTINGS (28) FROM TOP PLATE (6).
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
20-35
