1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
NOTE
Note position of elbow and tube prior to removal to aid in
TM 9-2320-363-34-2
installation.
LOOSEN JAM NUT (1) AND REMOVE ELBOW (2) AND PACKING (3) FROM COVER (4). DISCARD
PACKING.
REMOVE TWO BOLTS (5), TWO LOCK WASHERS (6), TUBE (7), AND GASKET (8) FROM BODY
(9). DISCARD GASKET, BOLTS, AND LOCK WASHERS.
REMOVE SCREW (10), LOCK WASHER (11), AND WASHER (12) FROM SHAFT (13). DISCARD
LOCK WASHER.
REMOVE GEAR (14) FROM SHAFT (13).
REMOVE WOODRUFF KEY (15) FROM SHAFT (13).
NOTE
Note position of flange prior to removal to aid in installation.
REMOVE THREE SCREWS (16), FLANGE (17), AND GASKET (18) FROM BODY (9). DISCARD
GASKET.
REMOVE FIVE SCREWS (19) AND COVER (4) FROM BODY (9).
REMOVE AND DISCARD LARGE PACKING (20) AND SMALL PACKING (21) FROM BODY (9).
REMOVE VALVE CAP (22), PACKING (23), SPRING (24), AND VALVE (25) FROM COVER (4).
DISCARD PACKING.
NOTE
Perform step 10 only if pins are damaged.
REMOVE TWO PINS (26) FROM COVER (4).
19-3