TM 9-2320-363-34-2
REAR-REAR AXLE DIFFERENTIAL CARRIER REPAIR (C0NT)
36.
37.
INSTALL TWO BEARING CUPS (29).
USING SUITABLE
CARRIER (8).
LIFTING DEVICE, INSTALL RING GEAR SUBASSEMBLY (30) IN DIFFERENTIAL
38.
INSTALL TWO BEARING CAPS (27 AND 28), FOUR WASHERS (31), AND FOUR CAPSCREWS (32).
NOTE
If there is a problem performing step 39, tighten four capscrews to 10-20 lb-ft
(14-27 N.m).
39.
40.
41.
INSTALL TWO ADJUSTING RINGS (33) IN DIFFERENTIAL CARRIER (8).
ALL EXCEPT M915A2: TIGHTEN FOUR CAPSCREWS (32) TO 270-350 LB-FT (366-475 N.m).
M915A2: TIGHTEN FOUR CAPSCREWS (32) TO 347-431 LB-FT (470-585 N.m).
INSTALL DIAL INDICATOR ON FLANGE OF DIFFERENTIAL CARRIER (8) WITH PLUNGER
AGAINST BACK SURFACE OF RING GEAR (21).
17-66
Change 1
