TM 9-2320-363-34-2
44. REMOVE TWO BEARING CAPS (19 AND 20).
45. INSTALL TWO BEARING CUPS (21).
46. USING SUITABLE LIFTING DEVICE, INSTALL RING GEAR SUBASSEMBLY (22) IN DIFFERENTIAL
CARRIER (3).
47.
INSTALL TWO BEARING CAPS (19 AND 20), FOUR WASHERS (23), AND FOUR CAPSCREWS (24).
48. INSTALL TWO ADJUSTING RINGS (25) IN DIFFERENTIAL CARRIER (3).
49.
ALL EXCEPT M915A2: TIGHTEN FOUR CAPSCREWS (24) TO 480-600 LB-FT (650-810 N.m).
M915A2: TIGHTEN FOUR CAPSCREWS (24) TO 345-430 LB-FT (470-585 N.m).
Change 1
17-29