TM 9-2320-363-34-2
43. TO ADD BACKLASH, LOOSEN BEARING ADJUSTER (35) FIVE OR SIX NOTCHES.
44. LOOSEN BEARING ADJUSTER (36) ONE NOTCH.
45. TIGHTEN BEARING ADJUSTER (35) UNTIL BEARING ADJUSTER (35) RESISTS MOVEMENT, THEN
TIGHTEN TWO OR THREE MORE NOTCHES.
46. REPEAT STEP 42.
47. TO REMOVE BACKLASH, LOOSEN BEARING ADJUSTER (35) FIVE OR SIX NOTCHES.
48. TIGHTEN BEARING ADJUSTER (36) ONE NOTCH.
49. TIGHTEN BEARING ADJUSTER (35) UNTIL BEARING ADJUSTER (35) RESISTS MOVEMENT, THEN
TIGHTEN TWO OR THREE MORE NOTCHES.
50. REPEAT STEP 42.
51. PAINT ONE-THIRD OF TEETH ON RING GEAR (5) WITH PRUSSIAN BLUE DYE.
52. ROLL RING GEAR (5) ONE-THIRD TURN, THEN ROCK RING GEAR (5) FORWARD AND
BACKWARD TO SET PATTERN IN DYE.
16-19
