TM 9-2320-363-34-2
FRONT DIFFERENTIAL CARRIER REPAIR (CONT)
INCORRECT PATTERN
PATTERN TOO CLOSE TO TOOTH TOP LAND AND OFF CENTER
PATTERN D
NOTE
To add or remove shims in steps 56 and 57, remove ring gear and differential
assembly (steps 7 thru 13 in Disassembly) and pinion (steps 18 thru 20 in
Disassembly). Add or remove shims, then install pinion, ring gear, and differential
assembly (steps 28 thru 41).
56. IF TOOTH CONTACT IS LIKE PATTERN D, MOVE PINION (17) CLOSER TO RING GEAR (5) BY
REMOVING SHIMS (23). REPEAT STEPS 42 THRU 53.
INCORRECT PATTERN
PATTERN TOO CLOSE OR OFF TOOTH ROOT
57. IF TOOTH CONTACT
ADDING SHIMS (23).
PATTERN E
IS LIKE PATTERN E, MOVE PINION (17) AWAY FROM RING GEAR (5) BY
REPEAT STEPS 42 THRU 53.
16-22
