TM 9-2320-363-34-2
NOTE
Perform steps 1 and 2 only if bearing cups have been removed.
1.
INSTALL RETAINING RING (1) IN BEARING CAP (2).
2.
INSTALL TWO BEARING CUPS (3) AND SEAT AGAINST RETAINING RING (1).
3.
INSTALL INNER BEARING CONE (4) ON SPLINE END OF OUTPUT SHAFT (5). PRESS INNER
BEARING CONE (4) UNTIL SEATED AGAINST SHOULDER OF OUTPUT SHAFT (5).
4.
COAT INNER BEARING CONE (4) WITH GAA.
5.
INSTALL SPACER (6).
15-39
