TM 9-2320-363-34-2
Use general cleaning methods to clean all parts (page 2-30).
1.
INSPECT BEARINGS IN ACCORDANCE WITH TM 9-214.
2.
INSPECT ALL PARTS FOR WEAR OR DAMAGE.
Use general repair methods to repair damaged parts (page 2-33).
1.
PLACE LOWER REAR OUTPUT SHAFT (1) ON CLEAN WORK SURFACE AND INSTALL SPACER (2).
2.
PRESS BEARING CONE (3) ON LOWER REAR OUTPUT SHAFT (1) AND SEAT AGAINST SPACER (2).
3.
COAT BEARING CONE (3) WITH GAA.
15-35
