TM 9-2320-363-34-2
CYLINDER HEAD REPAIR (CONT)
REPAIR/ASSEMBELY
1.
INSTALL SEVEN
(5.0 +0.5 mm).
NOTE
Install new dowels and new plugs only if necessary.
HOLLOW DOWELS (1) ON CYLINDER HEAD (2) TO HEIGHT OF 0.199 +0.010 IN.
CAUTION
Make sure diamond dowels are correctly alined. Failure to do so could result
in engine failure.
2.
INSTALL THREE DIAMOND DOWELS (3) TO HEIGHT OF 0.240 +0.010 IN, (6.1 +0.5 mm),
ANGULAR ORIENTATION OF DIAMOND DOWELS MUST BE PARALLEL TO CENTERLINE THRU
DOWEL HOLES WITHIN +4 DEGREES, AS SHOWN.
12-24