TM 9-2320-363-34-2
NOTE
Install each valve in same bore from which valve was removed.
APPLY LUBRICATING OIL TO ALL PARTS AND TO VALVE BODY (2).
INSTALL THIRD AND FOURTH CLUTCH LOCKUP CUTOFF VALVE (12) AND VALVE PLUG (11) IN
BORE (13).
3.
4.
5.
6.
7.
C A U T I O N
Retainer pins must not be driven in beyond machined surface of valve body
to prevent damage to equipment.
INSTALL RETAINER PIN (10) IN VALVE BODY (2).
INSTALL FIRST AND SECOND CLUTCH LOCKUP CUTOFF VALVE (8) AND VALVE PLUG (7) IN
BORE (9).
INSTALL RETAINER PIN (6) IN VALVE BODY (2).
INSTALL SECOND AND THIRD CLUTCH LOCKUP CUTOFF VALVE (4) AND VALVE PLUG (3) IN
BORE (5).
INSTALL RETAINER PIN (1) IN VALVE BODY (2).
NOTE
Follow-on Maintenance:
Install lockup cutoff control valve (page 3-262).
14-73
