TM 9-2320-363-34-2
FORWARD CLUTCH AND HOUSING REPLACEMENT AND REPAIR (CONT)
NOTE
Perform steps 1 thru 8 if PTO gear was removed.
Coat all parts with lubricating oil before installing.
1.
PLACE PILOT RING (1) IN PRESS.
2.
INSTALL FORWARD CLUTCH ASSEMBLY (2) ON PILOT RING (1).
3.
INSTALL RETAINING RING (3) IN GROOVE (4) ON OUTSIDE OF FORWARD CLUTCH ASSEMBLY (2).
W A R N I N G
Hot PTO gear can cause burns. Wear heat-resistant gloves.
4.
HEAT NEW PTO GEAR (5) IN OVEN OR OIL BATH TO 350°-375° F (177°-191° C).
NOTE
Install PTO gear with beveled side of inner teeth down.
5.
CAREFULLY PLACE PTO GEAR (5) ON FORWARD CLUTCH ASSEMBLY (2).
14-62