TM 9-2320-363-34-2
1.
HOLD TURBINE SHAFT (1) AND REMOVE FORWARD CLUTCH ASSEMBLY (2), OUTER RACE (3),
ROLLER BEARING (4), AND INNER RACE (5) FROM TRANSMISSION HOUSING (6).
2.
PLACE FORWARD CLUTCH ASSEMBLY (2) IN CLEAN AREA.
1.
REMOVE AND DISCARD TWO SEAL RINGS (1 AND 2) FROM TURBINE SHAFT (3).
2.
PLACE PILOT RING (4) ON BED OF PRESS.
3.
TURN FORWARD CLUTCH ASSEMBLY (5) OVER AND INSTALL TURBINE SHAFT (3) THRU PILOT
RING (4) AND IN BED OF PRESS.
14-55
