9.
10.
11.
13.
TM 9-2320-363-34-2
INSTALL TORQUE CONVERTER HOUSING (8) ON TRANSMISSION HOUSING (9).
REMOVE LIFTING DEVICE AND TWO EYE HOOKS (7).
REMOVE TWO GUIDE STUDS (10).
INSTALL SEVEN SCREWS (11) AND SEVEN LOCK WASHERS (12). TIGHTEN SEVEN SCREWS TO
70-80 LB-FT (95-108 N.m).
INSTALL SEVEN SCREWS (13) AND SEVEN LOCK WASHERS (14) TO HOLD TORQUE
CONVERTER HOUSING (8) TO TRANSMISSION HOUSING (9). TIGHTEN SEVEN SCREWS (13) TO
80 LB-FT (108 N.m).
NOTE
Follow-on Maintenance:
Install torque converter pump (page 14-27).
14-53
