TM 9-2320-363-34-2
NOTE
Make sure retaining ring is positioned over retainer washer before installing
bearing installer.
20. INSTALL BEARING INSTALLER (16) TO FRONT SUPPORT ASSEMBLY (7).
21. USING BEARING INSTALLER (16), COMPRESS VALVE ASSEMBLY (23) AND INSTALL RETAINING
RING (24).
22. USING BEARING INSTALLER (16), RELEASE VALVE ASSEMBLY (23).
23. REMOVE BEARING INSTALLER (16).
24. INSTALL TWO SCREWS (9). TIGHTEN FOUR SCREWS (9) TO 35-45 LB-FT (47-61 N.m).
25. INSTALL SPRING (25), CONVERTER BYPASS VALVE (26), VALVE SEAT (27), AND SUPPORT
ASSEMBLY (28).
26. INSTALL RETAINING RING (29) WHILE PUSHING SUPPORT ASSEMBLY (28).
14-47