TM 9-2320-363-34-2
5.
INSTALL THREE SCREWS (8) ACROSS FRONT SUPPORT ASSEMBLY (7).
NOTE
Do not install four screws (9) around outer edge of front support assembly.
6.
INSTALL 11 SCREWS (10) AROUND OUTER EDGE OF FRONT SUPPORT ASSEMBLY (7).
7.
INSTALL SCREW (11).
8.
TIGHTEN 3 SCREWS (8), 11 SCREWS (10), AND SCREW (11) TO 35-45 LB-FT (47-61 N.m).
9.
INSTALL MAIN PRESSURE REGULATOR VALVE (12) SMALL END FIRST.
10. INSTALL MAIN PRESSURE REGULATOR VALVE SPRING (13) AND VALVE STOP (14).
11. INSTALL RETAINER WASHER (15) ON MAIN PRESSURE REGULATOR VALVE SPRING (13).
14-45
