TM 9-2320-363-34-2
TORQUE CONVERTER HOUSING AND FRONT SUPPORT REPLACEMENT
AND REPAIR (CONT)
12.
13.
14.
15.
NOTE
Make sure retaining ring is positioned over retainer washer before installing
bearing installer.
INSTALL BEARING INSTALLER (16) TO FRONT SUPPORT ASSEMBLY (7).
USING BEARING INSTALLER (16), COMPRESS VALVE ASSEMBLY (17) AND INSTALL RETAINING
RING (18).
USING BEARING INSTALLER (16), RELEASE VALVE ASSEMBLY (17).
REMOVE BEARING INSTALLER (16).
16.
17.
18.
19.
INSTALL TWO SCREWS (9). DO NOT TIGHTEN SCREWS.
INSTALL LOCKUP SHIFT VALVE (19) SMALL END FIRST.
INSTALL VALVE SPRING (20) AND VALVE STOP (21).
INSTALL RETAINER WASHER (22) ON VALVE SPRING (20).
14-46
