TM 9-2320-363-34-2
17.
18.
WITH VALVE SEAT REMOVER HANDLE (16) IN VERTICAL POSITION, INSERT VALVE SEAT
COLLET PORTION OF VALVE SEAT REMOVER BODY (19) FULLY INTO VALVE SEAT.
HOLD VALVE SEAT REMOVER BODY (19) SQUARE WITH SURFACE OF CYLINDER HEAD FIRE
DECK (20) AND PULL VALVE SEAT REMOVER HANDLE (16) UNTIL FIRM RESISTANCE IS FELT.
HOLD HANDLE (16) IN THIS POSITION.
CAUTION
Make sure valve seat remover body remains flat on cylinder head fire deck
when moving collet handle to prevent damage to collet and to correct
engagement of valve seat insert.
19. HOLD VALVE SEAT REMOVER HANDLE (16) DOWN. GRASP VALVE SEAT COLLET HANDLE (21)
AND ROTATE BACK AND FORTH SEVERAL TIMES.
12-14
