TM 9-2320-363-34-2
CYLINDER HEAD REPAIR
This task covers:
a. Disassembly b. Inspection c. Cleaning d. Repair/Assembly
Tools and Special Equipment:
Shop Equipment, SC 4910-95-CL-A31
TOOl Kit, SC 5180-90-CL-N05
Shop Equipment, SC 5180-95-CL-A62
Shop Equipment, SC 4910-95-CL-A63
Valve Seat Remover, J23479-460
Valve Seat installer, J33190
Valve Seat Collet, J23479-29
Valve Seat Installer, J34983
Cylinder Head Adapter Plate, J35636
Cylinder Block Adapter Plate, J35635-A
Dowel Installer Set, J36224
Plug Installer Set, J35653
Driver Handle, J7079-2
Valve Guide Remover, J34696-B
Valve Guide Installer, J33191 -A
Injector Tube Reconditioning Set, J33880
Pressure Test Kit, J36223-C
Cylinder Head Lifter, J35641
Spring Compressor, J35580
Materials/Parts:
Kit, Intake
P/N 23501576
Valve (12)
Kit, Exhaust
P/N 23507504
Valve (12)
Insert, Intake
P/N 8929127
Valve (12)
Insert, Exhaust
P/N 8929126
Valve (12)
Guide, Valve (24)
P/N 8929631
Key, Valve (48)
P/N 0984-C
Seal, Guide (24)
P/N 85.0691-9
Materials/Parts (Cent):
Compound, Pipe
Appendix B, Item 15
Sealing
Oil, Cutting
Appendix B, Item 36
Dye, Prussian Blue
Appendix B, Item 17
Sealant,
Appendix B, Item 51
Non-Hardening
Equipment Condition:
Reference
Condition Description
Page 3-80
Cyiinder Head Removed
General Safety Instructions:
WARNING
l Valve guide is removed from
cylinder head under force.
Position heavy block of wood
at angle, beneath guide, to
deflect valve guide and
prevent personal injury.
. To prevent injury, compressed
air will not exceed 30 psi (207
kPa). Use only with effective
chip guarding and personal
protective equipment, goggles,
shield, and gloves.
Oil, Lubricating
Appendix B, Item 37
12-9
