TM 9-2320-363-34-2
1.
REMOVE FAN (1), WOODRUFF KEY (2), AND SPACER (3).
2.
REMOVE NUT (4), LOCK WASHER (5), AND LEAD (6) FROM F+ TERMINAL (7). DISCARD
WASHER.
3.
REMOVE FOUR SCREWS (8), COVER (9), AND GASKET (10). DISCARD GASKET.
4.
REMOVE TWO BRUSHES (11).
5.
REMOVE THREE LOCK NUTS (12) AND THREE SCREWS (13). DISCARD LOCK NUTS.
LOCK
C A U T I O N
If drive end housing binds, tap gently on mounting ears. Make sure drive end
housing separates from stator and stator remains attached to slip ring end
housing to avoid damage to stator leads.
6.
REMOVE ROTOR AND DRIVE END HOUSING (14) FROM STATOR (15) AND SLIP RING END
HOUSING (16).
13-17