TM 9-2320-363-34-2
18. INSTALL TWO INSULATING BUSHINGS (30) IN NEGATIVE RECTIFIER (31) AND POSITIVE
RECTIFIER (32).
19. INSTALL NEGATIVE RECTIFIER (31), POSITIVE RECTIFIER (32), TWO INSULATING WASHERS
(33), TWO WASHERS (34), TWO NEW LOCK WASHERS (35), AND TWO SCREWS (36).
20. INSTALL CAPACITOR (37) AND TWO SCREWS (38).
21.
INSTALL TWO TERMINAL SCREWS (39), TWO INSULATOR BUSHINGS (40), AND TWO NEW TENZ
NUTS (41).
CAUTION
Use caution to make sure stator leads are not damaged.
22.
23.
24.
25.
28.
27.
28.
29.
30.
INSTALL STATOR (42) IN SLIP RING END HOUSING (18).
CONNECT THREE LEADS (43) AND INSTALL THREE NEW TENZ NUTS (44).
INSTALL ROTOR AND DRIVE END HOUSING (15) IN STATOR (42) AND SLIP RING END HOUSING
(18)
INSTALL THREE SCREWS (45) AND THREE NEW LOCK NUTS (46).
INSTALL TWO TERMINAL STUDS (47), TWO NEW LOCK WASHERS (48), TWO NUTS (49), TWO
NEW LOCK WASHERS (50), AND TWO NUTS (51).
INSTALL NEW SEAL (52), BRUSH HOLDER (53), AND FOUR SCREWS (54).
INSTALL TWO BRUSHES (55).
INSTALL TWO JUMPERS (56), NEW GASKET (57), COVER (58), TWO GUARD WASHERS (59),
TWO NEW LOCK WASHERS (60), AND TWO NUTS (61).
INSTALL SPACER (62), WOODRUFF KEY (63), AND FAN (64).
13-15
