TM 9-2320-363-34-1
FRONT BALL SOCKET REPLACEMENT (CONT)
18.
19.
20.
21.
22.
23.
24.
INSTALL END PLATE (23) AND TWO SCREWS (24) ON UPPER AXLE BALL TRUNNION
TIGHTEN SCREWS TO 40 LB-FT (54 N.m).
NOTE
Steps 19 thru 23 are for left side only.
Install same number and thickness of shims as removed.
INSTALL SHIMS (25) ON FOUR STUDS (8).
NOTE
Install steering arm with flange side down.
INSTALL STEERING ARM (26) ON FOUR STUDS (8).
INSTALL ONE DOWEL (27) ON EACH OF FOUR STUDS (8).
INSTALL FOUR NEW LOCK WASHERS (28) AND FOUR NUTS (29) ON STEERING ARM
TIGHTEN NUTS TO 35-40 LB-FT (47-54 N.m).
IF REMOVED, INSTALL NEW GREASE FITTING (30).
APPLY COAT OF GREASE TO UPPER BEARING AT GREASE FlTTING (30).
(13).
(26).
5-26
