TM 9-2320-363-34-1
2.
3.
4.
NOTE
Top bearing cup has small opening up and bottom bearing cup has small
opening down.
INSTALL BEARING CUPS (3 AND 4) IN BALL SOCKET (5). TAP BEARING CUPS (3 AND 4) UNTIL
BEARING CUPS ARE NOT MORE THAN 1/8 IN. (3.18 mm) ABOVE BALL SOCKET (5).
INSTALL TWO BUSHINGS (6) AND TWO SEALS (7) IN BALL SOCKET (5).
IF REMOVED, INSTALL FOUR STUDS (8) IN LEFT BALL SOCKET (5).
5.
6.
NOTE
Steps 5 thru 18 are for both sides.
PACK LOWER BEARING (9) WITH GREASE AND INSTALL IN BEARING CUP (4).
PACK UPPER BEARING (10) WITH GREASE AND INSTALL IN BEARING CUP (3).
5-23
