TM 9-2320-363-34-1
10. APPLY LIGHT COAT OF GREASE TO THREADS OF TWO SCREWS (15).
11. INSTALL END PLATE (16) AND TWO SCREWS (15) ON LOWER AXLE BALL TRUNNION (14).
TIGHTEN SCREWS TO 40 LB-FT (54 N.m).
NOTE
Install same number and thickness of shims as removed.
12. INSTALL SHIMS (17), BOTTOM COVER (18), FOUR NEW LOCK WASHERS (19), AND FOUR
SCREWS (20). TIGHTEN SCREWS TO 185 LB-FT (251 N.m).
13. INSTALL GREASE FlTTING (21) IN BOTTOM COVER (18).
14. APPLY GREASE TO LOWER BEARING AT GREASE FlTTlNG (21).
15. REMOVE GREASE FlTTING (21).
16. INSTALL PIPE PLUG (22).
17. APPLY GREASE TO BALL AND BUSHING ASSEMBLY (2) AT REAR OF BALL SOCKET (5).
5-25
