TM 9-2320-363-34-1
Inspect all pads
1.
2.
3.
4.
5.
6.
7.
8.
9.
INSTALL BOOT
for wear or damage.
(16) AND SPOOL (14) ON SOLENOID PLUNGER (17).
ROTATE STARTER SOLENOID (4) SO MOUNTING BRACKET (13) FACES AWAY FROM STARTER
MOTOR (7).
INSTALL SPOOL (14) IN SHIFT FORK (15).
ROTATE STARTER SOLENOID (4) TO MOUNTING POSITION AND PRESS FLUSH WITH HOUSING
(12).
APPLY ADHESIVE-SEALANT TO THREADS AND INSTALL TWO SCREWS (11).
INSTALL JUMPER (9) ON STUD (10).
APPLY ADHESIVE-SEALANT TO LAST 1/4 IN. OF THREADS ON STUD (10), HOLD NUT (6) AND
INSTALL NUT (8). TIGHTEN NUT (8) TO 21-29 LB-FT (28-39 N.m).
INSTALL NUT (5) ON STARTER SOLENOID (4). TIGHTEN NUT TO 18-22 LB-FT (24-30 N.m).
INSTALL WIRE (3), NEW LOCK WASHER (2), AND NUT (1) ON STARTER SOLENOID (4).
NOTE
Follow-on Maintenance:
Install starter (TM 9-2320-363-20).
4-49
