TM 9-2320-363-34-1
1.
2.
3.
4.
5.
W A R N I N G
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
COAT PIPE THREADS OF FITTING (2) WITH PIPE THREAD SEALING COMPOUND AND INSTALL
FITTING (2) IN LUBRICATION PUMP (5).
C O A T P U M P M O U N T I N G S U R F A C E O F B E A R I N G C O V E R ( 6 ) W I T H S I L I C O N E
ADHESIVE-SEALANT.
INSTALL LUBRICATION PUMP (5) ON BEARING COVER (6) WITH FOUR NEW LOCK WASHERS
(4) AND FOUR SCREWS (3). TIGHTEN SCREWS TO 15 LB-FT (20 N.m).
INSTALL LUBRICATION HOSE (1).
COAT THREADS OF PLUG (7) WITH PIPE THREAD SEALING COMPOUND AND INSTALL PLUG
(7).
NOTE
Follow-on Maintenance:
Fill transfer case with oil (TM 9-2320-363-20).
Change 1
3-277/(3-278 Blank)
