TM  9-2320-363-34-1 CAMSHAFT   AND   BEARINGS   REPLACEMENT This  task  covers: a. Removal b. Cleaning c. Inspection d. Installation Tools  and  Special  Equipment: General  Safety  Instructions: Shop  Equipment,  SC  4910-95-CL-A31 Tool Kit, SC 5180-90-CL-N05 Rocker Stud Socket, J36003 Cam Gear Retaining Tool, J35652 Caulking Gun, 805774 Materials/Parts: Ring, Seal (2) Oil,  Lubricating Eliminator,  Gasket Plastigauge Towel,  Shop International Compound No. 2 Tag,  Identification Solvent,  Drycleaning Personnel Required: (2) References: TM  9-2320-363-20 Equipment   Condition: Reference TM  9-2320-363-20 Page  3-183 Cam Gear Pilot, J35906 P/N  8929740 Appendix B, Item 37 Appendix B, Item 18 Appendix B, Item 46 Appendix B, Item 62 Appendix B, Item 29 Appendix B, Item 55 Appendix B, Item 54 Condition   Description Tachometer  Drive Removed Rocker  Arm  Assemblies Removed W A R N I N G To prevent injury, compressed   air   will   not exceed   30   psi   (207   kPa). Use   only   with   effective   chip guarding and personal protective equipment, goggles,  shield,  and  gloves. Camshaft   weighs   53   lb   (24 kg).   Attach   suitable   lifting device   prior   to   removal   to prevent   possible   injury   to personnel. Adhesives,   solvents,   and sealing  compounds  can  burn easily,  can  give  off  harmful vapors,   and   are   harmful   to skin   and   clothing.   To   avoid injury   or   death,   keep   away from   open   fire   and   use   in well-ventilated area. If adhesive,   solvent   or   sealing compound   gets   on   skin   or clothing,   wash   immediately with  soap  and  water. 3-162