1.
MAKE SURE ALL
ARE CLEAN AND
SURFACES OF COUPLING, DISK ASSEMBLY,
FREE FROM ANY FOREIGN MATERIAL.
TM 9-2320-363-34-1
FOUR DISKS, AND FLEX PLATE
2.
USE GENERAL CLEANING METHODS TO CLEAN ALL PARTS (PAGE 2-30).
1.
INSPECT PARTS FOR RUST, CRACKS, OR DAMAGE. IF ANY OF THESE CONDITIONS ARE
PRESENT, REPLACE PARTS.
2.
INSPECT ALL PARTS FOR WEAR OR DAMAGE.
Use general repair methodsto repair damaged parts (page 2-33).
1.
PLACE COUPLING (l), RECESSED SIDE DOWN, ON BENCH.
2.
INSTALL DISK ASSEMBLY (2) ON COUPLING (1) WITH REINFORCEMENT SIDE DOWN.
3.
INSTALL FOUR DISKS (3) ONTOPOF DISK ASSEMBLY (2).
3-157
