TM 9-2320-363-34-1
NOTE
Use 3/4-in. extension and hinged handle bar to prevent crankshaft rotation when
removing two bolts.
1.
INSERT 3/4-lN. EXTENSION (1), 4-6 IN. LONG, INTO SQUARE OPENING IN CENTER OF
CRANKSHAFT PULLEY AND HOLD EXTENSION (1) WITH HINGED HANDLE BAR (2).
NOTE
If flex plate assembly is to be repaired, go to step 2.
If flex plate assembly is not to be repaired, go to step 3.
2.
LOOSEN 12 BOLTS (3).
3.
REMOVE TWO BOLTS (4) AT 3 AND 9 O’CLOCK POSITIONS AND INSTALL TWO GUIDE STUDS
(5).
4.
REMOVE REMAINING 10 BOLTS (4).
5.
REMOVE AND DISCARD SCUFF PLATE (6).
3-155
