TM 9-2320-363-34-1
W A R N I N G
Engine weighs 2,850 lb (1294 kg). Use hoist with lifting capacity of 5,000 lb
(2270 kg) to lift and support engine. Failure to do so could result in injury to
personnel.
C A U T I O N
Lift engine only enough to take weight off engine mounts. If engine is lifted
too far, wiring harnesses may be crushed by cab crossmember.
4.
USING SUITABLE LIFTING DEVICE, LIFT ENGINE (16) SLIGHTLY.
NOTE
Steps 5 thru 7 are for left side.
5.
REMOVE TWO SCREWS (17), TWO WASHERS (18), TWO SCREWS (19), AND REAR ENGINE LEG
(20) FROM FLYWHEEL HOUSING (21).
6.
REMOVE TWO WASHERS (22) AND TWO ISOLATORS (23) FROM REAR ENGINE MOUNT (5).
7.
REMOVE THREE NUTS (24), THREE WASHERS (25), THREE SCREWS (26), THREE WASHERS
(27), REAR ENGINE MOUNT (5), AND SPACER (28) FROM FRAME (29).
8.
REPEAT STEPS 5 THRU 7 FOR RIGHT SIDE.
3-49
