TM 9-2320-363-34-1
REAR ENGINE MOUNTS REPLACEMENT
This task covers:
a. Removal b. Cleaning c. Inspection d. Installation
Applicable Configuration:
General Safety InstructIons:
M915A2
Tools and Special Equipment:
Tool Kit, SC 5180-90-CL-N05
Materials/Parts:
Isolator (4)
P/N CBA24-650-17
Nut , Lock
W A R N I NG
Engine weighs 2,850 lb (1294
kg). Use hoist with lifting
capacity of 5,000 lb (2270 kg)
to lift and support engine.
Failure to do so could result in
injury to personnel.
1.
LEFT SIDE ONLY: REMOVE TWO NUTS (l), TWO WASHERS (2),
WASHERS (4) FROM REAR ENGINE MOUNT (5).
2.
RIGHT SIDE ONLY: REMOVE LOCK NUT (6), CLAMP (7), SCREW
(10) FROM BRACKET (11). DISCARD LOCK NUT.
TWO SCREWS (3), AND TWO
(8), WASHER (9), AND CLAMP
3.
RIGHT SIDE ONLY: REMOVE TWO NUTS (12), TWO WASHERS (13), TWO SCREWS (14),
BRACKET (11), AND WASHER (15) FROM REAR ENGINE MOUNT (5).
3-48
