TM 9-2320-363-20-1
Table 2-2. Unit Preventive Maintenance Checks and Services (PMCS) for the M915 Family of Vehicles (Cont).
Location
Item
Item to Check/
Not Fully Mission
No.
Interval
Service
Procedure
Capable if:
33
Semi-
Hydraulic
Unwind entire length of cable (TM
annual
Winch, Winch
9-2320-363-10). Soak cable with clean
Cable (M916A1
OE/HDO (Item 18.1, Appendix C) and
and M916A2)
clean with a brush. Wipe off excess oil
and coat cable with grease (Item 14,
Appendix C) before rewinding on drum.
34
Semi-
Hydraulic
a.
Remove filler plug (39) and check
annual
Winch, Winch
level of oil in drum (38). Level should
Drum (M916A1
be even with bottom of filler plug
and M916A2)
opening.
b.
If level is low, fill drum (38) with gear
lubricating oil (Item 19, 20, or 21,
Appendix C) through filler plug (39)
opening. Approximate capacity is 5 qt
(4.7 I). Install filler plug.
When lubricating rear axle suspension
components, vehicle must be raised to
take weight off suspension to permit
lubrication to reach bearing surfaces.
35
Semi-
Rear Axles,
a.
Lubricate spring grease fitting (42)
annual
Suspension
Inside vehicle frame with grease
(Item 14, Appendix C).
b.
(All except M915A2). Lubricate
equalizing beam grease fitting (41)
with grease (Item 14, Appendix C).
2-18.20 Change 3
