TM 9-2320-363-20-1
Section 4
TROUBLESHOOTING CHARTS
FLASH CODE:
62
DDR DISPLAY:
(AUXILIARY OUTPUT #2) SHORT TO BATTERY (+)
SAE J1587 CODE:
SID: 040 FMI: 3
Indicates that the function assigned to the Auxiliary Output #2 circuit output is shorted to battery (+). This diagnostic
condition is detected when the DDEC III ECM is unsuccessful in turning ON the configurable function.
NOTE:
The DDR will display the parameter text description in TABLE 2 (ECM Output
Options) to identify the function assigned to AUXILIARY OUTPUT #2.
The DDEC III ECM supplies a switched ground to the AUXILIARY OUTPUT #2
circuit to turn ON the function assigned.
FLASH CODE:
62
DDR DISPLAY:
(AUXILIARY OUTPUT #2) OPEN CIRCUIT
SAE J1587 CODE:
SID: 040 FMI: 4
Indicates that the function assigned to the Auxiliary Output #2 circuit output is open or is shorted to ground. This
diagnostic condition is detected when the Auxiliary Output #2 function is OFF and the DDEC III ECM measures a low
voltage on the circuit output.
NOTE:
The DDR will display the parameter text description in TABLE 2 (ECM Output
Options) to identify the function assigned to AUXILIARY OUTPUT #2.
FLASH CODE:
62
DDR DISPLAY:
(AUXILIARY OUTPUT #5) SHORT TO BATTERY (+)
SAE J1587 CODE:
SID: 053 FMI: 3
Indicates that the function assigned to the Auxiliary Output #5 circuit output is shorted to battery (+). This diagnostic
condition is detected when the DDEC III ECM is unsuccessful in turning ON the configurable function.
NOTE:
The DDR will display the parameter text description in TABLE 2 (ECM Output
Options) to identify the function assigned to AUXILIARY OUTPUT #5.
The DDEC III ECM supplies a switched ground to the AUXILIARY OUTPUT #5
circuit to turn ON the function assigned.
FLASH CODE:
62
DDR DISPLAY:
(AUXILIARY OUTPUT #5) OPEN CIRCUIT
SAE J1587 CODE:
SID: 053 FMI: 4
Indicates that the function assigned to the Auxiliary Output #1 circuit output is open or is shorted to ground. This
diagnostic condition is detected when the Auxiliary Output #5 function is OFF and the DDEC III ECM measures a low
voltage on the circuit output.
NOTE:
The DDR will display the parameter text description in TABLE 2 (ECM Output
Options) to identify the function assigned to AUXILIARY OUTPUT #5.
3-345.30 Change 3
