TM 9-2320-363-10
Table 3-1. Troubleshooting (Con’t).
MALFUNCTlON
TEST OR INSPECTION
CORRECTIVE ACTlON
15.
ENGINE STARTS BUT MISFIRES OR RUNS ROUGH AFTER PROPER
WARMUP PERIOD.
Check air cleaner restriction indicator.
If indicator is not clear, notify Unit Maintenance.
16.
EXCESSIVE ENGINE OIL CONSUMPTION.
Check for loose oil lines and oil leaks.
If oil lines are loose or leaks are found, notify Unit Mainte-
nance.
17. EXCESSIVE EXHAUST SMOKE (AT NORMAL ENGINE OPERATING
SPEED).
Step 1.
Check air cleaner restriction indicator.
If indicator is not clear, notify Unit Maintenance.
Step 2.
Check for water in fuel.
Drain fuel/water separator (Table 2-1).
18.
LOW OR NO ENGINE OIL PRESSURE.
Check engine oil level.
If engine oil is low, fill to correct level (Appendix F).
POWER TAKE-OFF (PTO) (M916A1 AND M916A2)
19.
PTO DOES NOT ENGAGE.
Check position of PTO switch and that indicator light is ON.
Place PTO switch in ON position and ensure indicator light
comes ON.
STEERING
20.
HARD STEERING, SHIMMY, OR WANDERING.
NOTE
Check tire pressure when tires are cold.
Step 1.
Check that tires are properly inflated.
Inflate tires to proper pressure (Table 2-1).
3-12
