TM 9-2320-303-10
3-8.
OPERATION OF SPARE WHEEL AND TIRE ASSEMBLY CARRIER (Con't).
WARNING
Use caution when lifting or handling wheel and tire assembly. It is
heavy and could cause injury if improperly lifted or if it falls on you.
(3)
Slowly rotate gear shaft (1) counterclockwise one notch.
(4)
Support spare wheel and tire assembly (5) and remove wheel clamp plate
(6).
(5)
Repeat steps (2) and (3) until spare wheel and tire assembly (5) is lowered
to ground.
b.
Install Stare Wheel and Tire Assembly on Carrier.
(1)
Secure hoist cable (3) by inserting wheel clamp plate (6) through wheel
opening.
(2)
Turn gear shaft (1) clockwise until spare wheel and tire assembly (5) is
raised to stowed position.
(3)
Engage pawl (2) on gear shaft (1).
(4)
Install two nuts (4).
3-17
