TM 9-2320-303-10
3-9.
WHEEL AND TIRE ASSEMBLY REPLACEMENT (Con't).
(5)
For front or outer rear tire,
tighten wheel nuts according to tightening
pattern.
WHEEL NUT TIGHTENING PATTERN
(6)
If replacing inner rear tire, alternately tighten inner wheel nuts by removing
outer wheel nut according to tightening pattern and tighten inner wheel nut. After tightening
inner wheel nut, reinstall outer wheel nut and tighten according to tightening pattern.
(7)
Notify Unit Maintenance as soon as possible to apply proper torque.
(8)
Stow defective tire in spare wheel and tire carrier (paragraph 3-8) and
have it replaced or repaired as soon as possible.
(9)
Remove wheel blocks.
3-21