TM 9-2320-303-10
Table 3-1. Troubleshooting (Con't).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3. Check for worn, loose, or damaged parts on front axle or suspension. Check
steering linkage, wheels, and vehicle frame for worn, loose, or damaged
parts.
If worn, loose, or damaged parts are found, notify Unit Maintenance.
17. VEHICLE STEERING SLOW OR INTERMITTENT TO RESPOND.
Step 1. Check power steering fluid level.
If power steering fluid is low, fill to correct level (Appendix F).
Step 2. Check for proper operation of power steering.
With vehicle at halt, turn steering wheel in either direction until steer limit
is reached. Hold steering wheel in position for five seconds. Turn
steering wheel in other direction until steering limit is reached. Repeat
cycling a number of times.
_______________________________
TRANSMISSION
18. SLOW OR ERRATIC TRANSMISSION ENGAGEMENT.
Check transmission fluid level.
If transmission fluid is low, fill to correct level (Appendix F).
19. TRANSMISSION FLUID TEMPERATURE GAGE INDICATES FLUID IS OVERHEATING
DURING NORMAL OPERATION.
Step 1. Check transmission fluid level.
If transmission fluid is low, fill to correct level (Appendix F).
Step 2. Check transmission fluid dipstick for discoloration that would indicate
water/coolant in fluid.
If dipstick is discolored, notify Unit Maintenance.
_______________________________
WHEELS AND TIRES
20. TIRES WORN UNEVENLY OR EXCESSIVELY.
Step 1. Check tires for proper pressure.
Inflate tires to proper pressure (Table 2-1).
Step 2. Check for bent wheel rims.
If rim is bent, replace wheel and tire assembly. Notify Unit Maintenance
to apply proper torque.
3-11
