TM 9-2320-302-34
0010 00-26
POWER PACK REPLACEMENT - CONTINUED
0010 00
INSTALLATION - CONTINUED
NOTE
Steps 32 through 34 can be performed through center floor panel of cab.
32.
Install two clamps (70) with washer (69) and new lock nut (68).
33.
Install bracket (67), washer (66), and new lock nut (65) on crossmember.
34.
Install clamp (64) on bracket (67) with washer (63) and new lock nut (62).
35.
Position harness (58) and install two clamps (61), washers (60), and screws (59).
36.
Remove screw (57). Position harness (58) and install screw (57).
37.
Remove nut (53). Install solenoid (56), wire (55), washer (54), and nut (53).
64
62,63
65,66
67
70
68,69
56
57
58
59,60
61
