TM 9-2320-302-34
0096 00-6
CROSSMEMBER REPLACEMENT - CONTINUED
0096 00
INSTALLATION - CONTINUED
8.
Move wiring harness (3) into position and install four clamps (2) and new lock nuts (1).
NOTE
Perform steps 9 through 12 for this and other crossmembers.
9.
Tighten 1/2-13 grade 8 lock nuts to 68 lb-ft (92 Nm).
10.
Tighten 5/8-11 grade 8 lock nuts to 136 lb-ft (184 Nm).
11.
Tighten 3/4-10 grade 8 lock nuts to 241 lb-ft (327 Nm).
12.
Tighten 1”-8 grade 8 lock nuts to 582 lb-ft (789 Nm).
13.
Install pintle hook (TM 9-2320-302-20).
14.
Install taillight brackets (TM 9-2320-302-20).
END OF WORK PACKAGE
3
1,2
1,2
