TM 9-2320-302-34
0096 00-1
CROSSMEMBER REPLACEMENT
0096 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
General Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Wrench, torque, 50-250 lb-ft (Item 139, WP 0126 00)
Wrench, torque, 100-600 lb-ft (Item 140, WP
0126 00)
Wrench set, socket, 3/4 in drive (Item 141, WP
0126 00)
Materials/Parts
Nut, lock (P/N 23-09901-116) (12)
Nut, lock (P/N MS51922-1) (4)
Nut, lock (P/N MS51922-33) (22)
Nut, lock (P/N MS51922-49) (12)
Equipment Condition
Taillight brackets removed (TM 9-2320-302-20)
Pintle hook removed (TM 9-2320-302-20)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
This task covers replacement of the REAR crossmember and is typical of procedures used to replace other
crossmembers of the vehicle.
