TM 9-2320-302-34
0094 00-3
TOP PLATE REPAIR - CONTINUED
0094 00
DISASSEMBLY - CONTINUED
WARNING
When removing spring, compress spring slightly and relieve tension slowly. Failure to do so could cause
spring to fly off, resulting in injury to personnel.
8.
Remove and discard shaft (23), spring (24), and yoke (25) from top plate (17).
9.
Remove two cotter pins (26), pin (27), spring (28), and lock guard (29). Discard cotter pins, pin, and lock guard.
10.
Remove two pins (30), pins (31), and locks (1). Discard cotter pins and pins.
11.
If damaged, remove two grease fittings (32) from top plate (17).
NOTE
Lube plates must be replaced as a pair.
12.
Remove 18 lock nuts (33), washers (34), and two lube plates (35) from top plate (17). Discard lock nuts.
13.
Remove two retaining clips (36) and two pocket inserts (37) from top plate (17).
ASSEMBLY
1.
Install two pocket inserts (37) on top plate (17) and secure with two retaining clips (36).
2.
Ensure top plate mating surface is clean and dry.
35
34
33
17
36
37
36
37
17
