TM 9-2320-302-34
0084 00-4
AIR COMPRESSOR REPAIR - CONTINUED
0084 00
DISASSEMBLY - CONTINUED
12.
Place cylinder head (13) on bench, deck side up, and insert inserter and remover tool (22) in inlet valve stop (23).
Remove inlet valve stop.
13.
Remove inlet valve spring (24), inlet valve (25), inlet valve seat (26), and copper gasket (27) from bore. Discard gasket.
14.
Repeat step 12 and 13 for second valve stop (23).
15.
Remove two discharge valve seats (28).
16.
Remove two discharge valves (29) and springs (30) from bores of cylinder head (13).
17.
Remove six bolts (31), crankcase cover (32), and gasket (33). Discard gasket.
18.
Rotate crankshaft (34) until connecting rod and piston assembly (35) is at bottom of travel.
22
23
24
26
25
25
27
27
13
26
23
24
28
29
30
13
30
29
