TM 9-2320-302-34
0084 00-2
AIR COMPRESSOR REPAIR - CONTINUED
0084 00
DISASSEMBLY - CONTINUED
2.
Engage teeth (3) of cover plate (4) with air compressor drive (5). Align spacer legs of cover plate with mounting bolt
holes in flange face of air compressor (6). Install two bolts (7), nuts (8), and cover plate on flange face of air compressor.
3.
Secure air compressor (6) in soft-jawed vise and remove drive hub retaining bolt (9).
4.
Remove two nuts (8), bolts (7), and cover plate (4).
5.
Remove drive hub (10) and drive gear (5) from crankshaft.
6.
Remove four bolts (11) from drive hub (10) and drive gear (5).
7.
Remove air compressor (6) from vise.
NOTE
It may be necessary to tap cylinder head with fiber or plastic mallet to break cylinder head gasket seal.
7
6
4
5
3
8
6
7
8
9
4
