TM 9-2320-302-34
0046 00-6
FUEL INJECTOR REPLACEMENT - CONTINUED
0046 00
INSTALLATION - CONTINUED
CAUTION
Check position of injector and holddown clamp to ensure clearance between intake valve spring and injector
follower. Failure to do so will result in equipment damage.
8.
Tighten holddown bolt (8) to 43-49 lb-ft (58-66 Nm).
9.
Connect injector wiring harness terminals (7) and tighten two screws (6) to 12-17 lb-in (1.36-1.92 Nm).
10.
Connect fuel supply hose (1) to elbow fitting (2) and fuel return line (4) to elbow fitting (5) at rear of cylinder head (3).
11.
Install rocker arm assemblies (WP 0027 00).
12.
Install rocker arm cover (WP 0016 00).
END OF WORK PACKAGE
7
6
3
5
1
2
4
