TM 9-2320-302-34
0027 00-13
ROCKER ARM ASSEMBLIES MAINTENANCE - CONTINUED
0027 00
ADJUSTMENT - CONTINUED
NOTE
Ensure injector timing height gage is seated on machined surface with tip in pilot hole. Foreign material in
pilot hole or on machined surface may prevent accurate setting of injector height.
i.
Adjust height of fuel injector (29) for cylinder indicated on valve overlap adjustment sequence Table 1. Position
small end of injector timing height gage (30) in hole in fuel injector body (31) with flag (32) of gage toward fuel
injector plunger (33), as shown.
31
32
30
33
29
