TM 9-2320-302-34
0027 00-9
ROCKER ARM ASSEMBLIES MAINTENANCE - CONTINUED
0027 00
INSTALLATION - CONTINUED
NOTE
Position lifter fingers under cross arch of exhaust rocker arm assembly (above center section of injector
rocker assembly). Lifter fingers fit between intake and injector rockers.
7.
Using rocker arm lifter (5) on rocker arm assembly sets (6) from cam roller side, place rocker arm shaft (7) and three
rocker arm assembly sets (6) in position on cam caps (24).
8.
Install six saddle spacers (2) on six retaining bolts (1).
9.
Install six retaining bolts (1) through rocker arm shaft (7) and cam cap saddles.
10.
Install two saddle spacers (4) and nuts (3) on rocker arm shaft studs (23).
6
5
7
24
7
2
1
3
4
23
