TM 9-2320-302-34
0028 00-4
OIL PAN MAINTENANCE - CONTINUED
0028 00
REPAIR
CAUTION
Hold insert to prevent scoring of plastic oil pan. Failure to prevent insert from slipping during removal could
cause damage and result in equipment failure.
1.
Hold flats of insert (10) to prevent slippage and remove pipe plug (11).
2.
Remove nut (12), insert (10), and o-ring (13) from oil pan (2). Discard o-ring.
3.
Install new o-ring (13) on flange of insert (10) and install insert in oil pan (2).
CAUTION
Hold insert to prevent scoring of plastic oil pan. Failure to prevent insert from spinning during installation
could cause damage and result in equipment failure.
4.
Hold insert (10) and install nut (12). Tighten nut to 136-145 lb-ft (184-197 Nm).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesive or
sealing compound gets on skin or clothing, wash immediately with soap and water.
5.
Coat threads of pipe plug (11) with pipe sealing compound and install pipe plug in insert (10). Hold insert while tighten-
ing pipe plug.
12
13
10
11
2
