TM 9-2320-302-34
0026 00-21
CAMSHAFT AND BEARINGS REPLACEMENT - CONTINUED
0026 00
INSTALLATION - CONTINUED
18.
Using dial indicator (3), place pointer in contact with side of camshaft lobe (4).
19.
Move camshaft (5) as far forward as possible. Hold in position and zero dial indicator (3).
20.
Move camshaft (5) to rear as far as possible. Read and record total amount of end play. Allowable camshaft end play is
0.003-0.015 in (0.076-0.381 mm).
21.
If end play is beyond maximum limit, remove and repair or replace camshaft drive gear assembly (WP 0034 00)
NOTE
Ensure old gasket forming compound has been removed from rear camshaft cover and surfaces.
8
9
11
7
6
10
10
3
4
5
