TM 9-2320-302-34
0022 00-9
ENGINE RETARDER MAINTENANCE - CONTINUED
0022 00
INSTALLATION - CONTINUED
2.
Attach tubing to compressed air gun nozzle and clear oil out of bolt holes.
NOTE
Position word OUT, stamped on each spacer bar, toward mid-engine, facing outside of engine.
3.
Position two spacer bars (7) on exhaust manifold side of cylinder head (8). Align bolt holes in spacer bars with engine
retarder (6) bolt holes in cylinder head.
CAUTION
Ensure engine retarder housings do not interfere with wiring harnesses. Failure to do so could result in dam-
age to equipment.
4.
Install three engine retarder (6) housings over rocker shafts.
5.
Apply international compound no. 2 to threads and undersides of head of nine bolts (4).
CAUTION
Ensure wires are away from moving parts to prevent possible movement and contact with valve springs.
6
6
8
7
4
4
