TM 9-2320-302-34
0015 00-3
EXHAUST MANIFOLD REPLACEMENT - CONTINUED
0015 00
INSTALLATION - CONTINUED
7.
Install six bolts (1) and spacers (3) in lower bolt holes and tighten hand tight.
8.
Remove six guide studs and replace with remaining six bolts (1) and spacers (3). Tighten hand tight.
9.
Tighten all bolts (1) to 43-54 lb-ft (58-73 Nm), in sequence shown.
10.
Install turbocharger (WP 0042 00).
11.
Install breather tube (WP 0017 00).
12.
Run engine (TM 9-2320-302-10) and check for leaks.
END OF WORK PACKAGE
6
8
4
1
12
10
11
9
3
2
5
7
TIGHTENING SEQUENCE
